- Hyster S30XM runs and operates great! serial #
|
- Steel table 97 x 50. Bottom two shelves wood
|
- Crane. 9 foot adjustable height and 136 inches
|
| |
| |
- Hydraulic hose crimper and cutter with table
|
- Fastenal bins with hydraulic fittings. Without
|
- Fastenal bins with hydraulic fittings and elbows.
|
| |
| |
- Two parts bins with contents
|
| |
| |
- Wire rack and wire. 16,14 and 12 gauge stranded
|
- Fleet charger. 6/12/24 volt
|
| |
- Hardware and fittings etc.
|
| |
- Air hose and tools, fan, tire etc.
|
| |
| |
| |
- Hyster E30XL 36V electric forklift, 42” forks, hr
|
- Pallet racking 3-12 foot sides and 11-105 inch
|
- Pallet racking 3-8foot sides and 16 beams 98 1/2.
|
- Pallet racking 3/8 foot sides and 12- 98 1/2
|
- Barrel rack. 7’ x 31 x 68 tall. Oil not included
|
- Barrel of SAE 10 W - 30. Near full
|
- Techata 1000 Sterling gear lube. Approximately
|
- Two steel cabinets with contents
|
| |
- Assorted fluids and sprayers
|
- Metal shelf unit. 97 x 24 1/2 long by 24.5 wood
|
| |
- Lincoln stick welder, table, welding helmets and
|
| |
| |
- Torch cart, gauges, torch head and goggles etc.
|
- Aluminum top table on wheels
|
- 3 Piece Power Conveyor. 25 Inches Wide By 21
|
- SMIPACK BP802AS Double chamber inline Shrink
|
- Three pushers and power conveyors.
|
- Three air tanks and steel lines
|
| |
| |
- 6 inch pipe and cart. Some 9 inch
|
| |
| |
- Yale LP gas forklift, 42” forks, 29,704 hours,
|
| |
| |
| |
- Combination and open end metric wrenches. 24 and
|
- Combination and open end metric wrenches. 24 and
|
| |
- DeWalt hacksaw blades, combination metric
|
- High voltage shrink cover, wire brushes, cable
|
| |
| |
- Blue safety covers and 3-100 W clear glass globes
|
- Forge tongs, Proto 5/8 open end
|
| |
- 46 mm Proto combination wrench
|
- 43 inch chain with safety hooks
|
- Drill Dr. drillbit sharpener
|
- 3/4 drive socket set, assorted sockets
|
| |
| |
- Lifting chains and clevis
|
- 3-24 inch pipe wrenches. One rigid
|
- Tool balancer, vacuum gauge, air tools and
|
| |
- Two sealed beam lamps, back up alarm and
|
- PVC glue and cleaner, torch, slic tote etc.Torch
|
- Toyota 7FBEU15 36V electric forklift, 42 inch
|
- Vice grip clamp, hole saw, wire ties etc.
|
- Power flex 523 adjustable frequency AC drive,
|
| |
- Black & Decker heavy duty 7 inch angle grinder
|
- Jet 30 ton bottle jack. No handle
|
- Jet 30 ton bottle jack. No handle
|
- 4- 3/4 pipe clamps. One with no tail piece
|
| |
- NAPA 12 ton bottle jack. No handle
|
- 20 ton bottle jack with handle
|
| |
| |
| |
- Rubber gloves bags and sling
|
- Black and Decker Timberwolf 1/2 in. right angle
|
- Two magnetic trouble lights
|
- 8 to 12 gauge heavy duty cord
|
| |
- Air regulator and Wilton 36 inch bar clamp
|
- Ideal 3/4 rigid or 1 inch EMT pipe bender
|
- 3/4 and 1/2 EMT pipe bender
|
| |
- Full case of Amoco grease
|
- 12 tubes of Grease AMOCO and mobile
|
| |
- V.mariotti ME10 (36V) electric forklift, 48"
|
- Rigid 36 inch aluminum pipe wrench
|
- Richard 36 inch aluminum pipe wrench
|
| |
- Bung wrench, torque wrench & 3/4 drive ratchet
|
- Sanding and polishing discs and wire brushes
|
| |
| |
| |
- Oil dispensers, finals and oil cans
|
- Rolling steps. 70 inches to the top step
|
- Lithium grease, eye wash fluid, knives and lock
|
| |
| |
| |
| |
| |
- Handsaw, C clamp, holesaws and saw blades etc.
|
| |
- Hardware, 1/2 in. drives, Torque wrench knife
|
| |
- Half-inch drives, American lock, and flashlight
|
- Air hoses and accessories
|
| |
| |
- New 7000 lumen LED worklight
|
- Yale 24V electric forklift, model no.
|
| |
| |
| |
- Fluid pumps, hose not good
|
- Trailer jacks and aluminum
|
- Air cylinders and fittings
|
| |
- Go Jo dispenser and guardian eye safe faucet
|
| |
| |
- Two metal tubs with contents
|
- Metal conduit. Some aluminum
|
| |
- Tote and hose with aluminum ends
|
| |
- Telescoping duster with dust pan
|
| |
| |
| |
| |
- 11 cans of silicone mold release
|
- Rubbermaid poly cart on wheels
|
| |
| |
- Six cans of Rustoleum hardhat safety yellow
|
- Yale 24v electric forklift 42” forks model,
|
- Five complete safety shields with tote
|
| |
| |
- Lithium grease and 3 grease guns
|
- Pallet of hardware, parts and miscellaneous
|
| |
- Plastic and nylon tubing. Various sizes
|
- Brass fittings and couplers
|
| |
| |
- Micrometer, snap on inch and 9/16 impact socket
|
| |
- Motorola two way radios, electric pencil
|
- Micro strobe and metal glove and forearm cover
|
- Metal banding cutter, wire brush, knives and tape
|
| |
- Steel table 97 1/2 x 45. Bottom shelf is wood
|
| |
- Barrel pumps and oil dispensers
|
- Plumbing supplies, lightbulbs, locksets etc.
|
- Lock out tag out, signs Etc
|
- Chain sling with safety ends, gas can, Shaft
|
- Drop cords, power strips etc.
|
| |
- Electrical boxes, covers etc. With tote
|
- Power module, pumps and metal filters
|
- Pallet racking 18‘ x 12‘ x 42?
|
- Handy tear down table 4’ x 28 in. x 39 in.
|
| |
- 4 Totes of assorted aluminum rounds etc.
|
- 2 Totes with assorted cap screw bolts
|
- Cabinet. 109 x 12 1/2 by 6 1/2 feet tall
|
- Hydraulic and galvanized fittings
|
- Bridgeport Vertical milling machine with shaping
|
- 1 1/4” Black & Decker professional magnetic drill
|
- Milwaukee 8” Metal cutting circle saw
|
| |
| |
| |
- De Walt angle grinder and Milwaukee angle drill
|
| |
- Milwaukee 1/2” electric impact
|
| |
- Oil pump , Clamps and shop supplies
|
- Kearney and Trecker Vertical milling machine
|
- Belt sandpaper 60”, 36 grit
|
- Dispenser with assorted sandpaper grit rolls
|
| |
- Forklift lights and horns
|
| |
| |
| |
| |
- 12‘ x 35‘ x 42" pallet racking
|
- Pallet with assorted parts etc.
|
| |
| |
| |
| |
- Machinist vices clamps and parts
|
| |
| |
| |
- 12” Troyke Mill vise platform
|
- Granite top precision table 49“ x 31 1/2“ x 27“
|
- Steel table/Polly top 48“ x 28“ x 41“
|
- Metal cabinet 16“ x 22“ x 34“
|
- Assorted poly carbonate plexiglass etc.
|
- 2 shelving units 7‘ x 3‘ x 18” and 7‘ x 3‘ x 12“
|
- Organizer and assorted hardware 82“ x 36“ x 12“
|
- Tripp lite portable air conditioning unit
|
- Steel welding table approximately 8‘ x 48“ x 36“
|
| |
| |
| |
- 4 Machine shop mats, up to 111”
|
- Steel table approximately 8‘ x 4‘ x 3‘ has wooden
|
- Vestil 2000 pound portable A frame hoist, tables
|
- 12‘ x 41‘ x 42“ pallet racking, buyer removes!
|
- 6‘ x 51“ portable whiteboard
|
| |
- Steel rolling cart 53“ x 36“ x 38“
|
| |
- Granite precision top table 36“ x 24“ x 39“
|
- MHC Rockwell type hardness tester, table and
|
- Jacobs rubber flex Collets
|
- Assorted Parts sprayer tips etc.
|
- Snap-on 2 1/2 ton floor Jack
|
- Adams machinery Cincinnati Bickford Radio arm
|
| |
| |
- Assorted machining drill bits and rack
|
| |
- Assorted metal hinges etc
|
| |
| |
| |
- Pallet racking 9‘ x 10‘ x 48” has attached metal
|
- 6‘ x 6‘MGrinding/Welding screen
|
- NEY model M 525 electric forge
|
- Electric stove refrigerator and toaster oven
|
- Assorted handtools and aprons
|
- Harig Super 612 grinder w/permanent magnetic
|
- M.J. Maillis smart series model WSMH-150-B.
|
| |
- Organizer/table and contents
|
- Freeport model SGS1020AH grinder
|
- Delta triple duty Grinder
|
- Cabinet with assorted grinder parts
|
| |
- Fastenal organizer with O-rings and nuts
|
- Assorted Electrical parts/Fuses
|
- Assorted deciaml Reimers and organizer
|
- Assorted Reamers and organizer
|
- O rings and set screws, organizer included!
|
- Fuses and electrical items 3 organizers included!
|
- 2 organizers with switches etc.
|
- 2 organizers with electrical connectors pipe
|
| |
- 3 organizers with washers, drive pins, stainless
|
- 2 Metal organizers with hardware
|
- Warner 32 foot extension ladder
|
| |
- 2 Fastenal organizers with steel Fittings
|
- 2 threaded rod organizers with threaded rod
|
- 3 Fastenal organizers and hardware
|
- 2 Fastenal organizers with hardware
|
| |
| |
- Fastenal organizer with hardware
|
- 3 organizers with hex bolts
|
- Three organizers with hex bolts
|
- 1 Fastenal organizer with hardware
|
- 1 Fastenal organizer with hardware
|
- 1 Fastenal organizer with hardware
|
- 1 Fastenal organizer with hardware
|
- 3 organizers with steel pipe fittings
|
- 3 organizers with steel fittings
|
- 3 organizers with assorted air fittings
|
- Organizer with Hardware and Stand
|
- 10‘ x 42“ x 19‘ pallet racking, electric wire,
|
| |
- Metal cabinet w/key 36“ x 18“ x 6‘
|
- Filing cabinets desk and desk chair
|
- Metal locking cabinet w/key 36“ x 18“ x 6‘
|
- Steel/wood shelf 72“ x 72“ x 13“
|
- Air vac and pressure washer
|
- Ultraprobe attenuator transfer curves
|
- 8‘ x 4‘ x 36“ steel table
|
| |
- Square D transformer etc.
|
- Earplugs eye wash latex gloves etc.
|
- Latex gloves and cotton gloves
|
| |
| |
- Lantech T-series roller stretch wrapper, works
|
| |
| |
| |
| |
| |
| |
| |
| |
- 2 Rubbermaid brute etc. trash cans
|
- Latex gloves and hand brooms
|
- Pallet racking 8’ x 9’ x 48”
|
- Pallet racking 8‘ x 8‘ x 48"
|
- 12‘ x 9‘ x 48“ pallet racking, buyer removes!
|
- Rubbermaid cart 48“ x 27“ x 34“
|
- Rubbermaid 1 cubic yard cart
|
- Bandit 320 scissor lift, as is!
|
- 7‘ x 8‘ x 23“ steel/pipe racking
|
| |
| |
| |
- 7‘ x 8‘ x 23“ steel/pipe racking
|
- Metal cabinet 78” x 36“ x 18“
|
- Pallet racking 8‘ x 9‘ x 48“
|
- 12‘ x 9‘ x 42" pallet racking, buyer removes!
|
- Steel racking, buyer removes! Metal stock not
|
- Assorted 12 feet, etc. metal stock, rack not
|
- Metal Bander and banding tools
|
- Nylon strapping cart and clips
|
- 9‘ x 17‘ x 48” pallet racking, buyer removes
|
- 12‘ x 8‘ x 42“ pallet racking, buyer removes!
|
- Pallet racking 12‘ x 8‘ 6“ x 42“
|
- 10‘ x 9‘ x 48“ pallet racking, buyer removes
|
| |
- 2 pallets of 1000 die cut pallet caps
|
- 3 pallets of 1000 die cut pallet caps
|
- Pallet of 41” x 45” cardboard pallet covers
|
| |
- 3 Pallets of 41” x 45” cardboard pallet covers
|
- Rapid dust collector, buyer removes!
|
- 12‘ x 9‘ x 42" pallet racking, buyer removes
|
- 14‘ x 19‘ x 42” pallet racking, buyer removes!
|
| |
- 14‘ x 19‘ x 42" pallet racking, buyer removes!
|
- Used oil containment System with filter crusher &
|
| |
- Used oil tank, Will be emptied! 5‘ x 64” x 27”
|
| |
| |
- Rubbermaid wave break mop bucket
|
- 44 gallon trashcan with top
|
- 55 gallon trashcan with top
|
- Manitowoc ice machine, 76“ x 22“ x 28“
|
| |
| |
| |
| |
| |
| |
| |
| |
- Bookshelf 6‘ x 4‘ x 10 1/2"
|
- Bookshelf 6‘ x 4‘ x 10 1/2“
|
| |
- Bookshelf 6‘ x 4‘ x 10 1/2"
|
- Bookshelf 6‘ x 4‘ x 10 1/2“
|
- Whirlpool refrigerator 63” x 28” x 29”
|
| |
- 5 boxes of MCR safety glasses
|
| |
| |
- Earmuffs, box, cutters, etc.
|
- Metal cabinet 42“ x 4‘ x 2‘
|
- Metal cabinet 78“ x 36“ x 18“
|
- Metal bookshelf 40 1/2" x 34 1/2“ x 13 1/2“
|
- Wooden first aid center 56" x 22“ x 12“
|
- Wire shelving unit 63“ x 5‘ x 2‘
|
| |
- Macbeth spectra light 77“ x 36“ x 24”
|
- Culligan water jugs, and rack
|
- wolftec international model WRT–200 rotary arm,
|
- Rubbermaid 1 cubic yard cart, as is!
|
| |
| |
- Weigh-tronix pallet scale, works great!
|
- 29“ x 24“ x 28“ steel rolling table
|
- Assorted shields and brackets
|
- Global industrial pallet jack, as is!
|
| |
- Lift rite pallet jack, as is!
|
| |
| |
| |
- Trashcan and wash buckets
|
| |
| |
- Assorted pipe clamps, control relays PVC fittings
|
- 3 scoop shovels, aluminum, plastic, and metal.
|
| |
- Control box, flex tube, aluminum, etc.
|
| |
- Simer sump pump with hose
|
- Sorting table, assorted tools, ladder, etc.
|
| |
- Electrical cords, doorstops, hardware, etc.
|
| |
| |
| |
- Brooms and industrial dust pan
|
- Assorted tubing and wire hose
|
- Auto bag model H25H sealer
|
| |
- "We recycle" garbage cans
|
- Unitherm insulation systems
|
| |
| |
| |
- 3 Rubbermaid 44 gallon trash cans
|
| |
- 2 solution tanks 6‘ x 63“ x 24“
|
- Water tank 52“ x 24“ x 24“
|
| |
- Filters, plastic chain and bottles, etc.
|
- 2 Rubbermaid brute, 44 gallon trash cans
|
- We recycle trash cans etc
|
| |
- 2 Rubbermaid brute, 44 gallon trash cans
|
| |
- 2 Rubbermaid brute, 44 gallon trash cans
|
- Garbage can, Squeegees, brooms, etc.
|
- 2 Rubbermaid brute 55 gallon trash cans
|
| |
- 2 Rubbermaid brute, 44 gallon trash cans
|
- (2) Ace and Rubbermaid brute, 32 gallon trash
|
- 2 Rubbermaid brute, 44 gallon trash cans
|
| |
- Sterling mobile hopper tote 44" x 44“ x 44“
|
- Control boxes, heaters, hand, soap, dispensers,
|
- 6 in. Lasco sch 80 PVC fittings
|
| |
- Corner mirror, commercial wall base, radios, etc.
|
- Assorted parts, pipe fittings, etc.
|
| |
| |
- Brass hand sprayer nozzles
|
| |
- Assorted flooring, valves, and parts
|
- Large lot of tarps, various sizes!
|
- Proco machinery, conveyor with controls and
|
- Minatech pressure, tester/conveyor
|
- Minatech conveyor/scanner
|
| |
- 2 sections of roller stand 5‘ x 10“ and 5‘ x 21“
|
| |
| |
| |
- Branson HV15A hot plate welder 86“ x 48“ x 75“
|
- Hytrol roller table 8‘ x 40“ x 38“
|
| |
- Aeration stand/fan 48“ x 53 1/2“ x 34“
|
- Metal dispenser/rolling cart 57“ x 25“ x 24“
|
| |
| |
- Tennant 5700 floor cleaner, no key, as is!
|
- Conveyer and roller stand, 5‘ x 10“ x 21“ and 11‘
|
- Hytrol conveyor and roller stand 5’ x 9 1/2”x
|
- Novatec model MPC-300 microprocessor controlled
|
| |
- As is conveyor 87“ x 11“ x 33“
|
| |
- Sterling mobile hopper/container 44" x 44“ x 44“
|
- IMS mobile bin/hopper 44" x 44“ x 49“
|
- Nelmor plastic grinder 70“ x 51“ x 43“ works
|
- Rapid Plastic grinder, as is! 70“ x 44“ x 68“
|
| |
| |
| |
- Steel table 6‘ x 36“ x 34“
|
- Steel table 5‘ x 30“ x 32“
|
- 3 steel tables 2‘ x 18“ x 37“
|
| |
- 2 steel tables, 2‘ x 18“ x 29“
|
| |
| |
- Stainless steel top table 34“ x 29“ x 38“
|
- Cart and steel/wood table
|
- 2 Rolling metal bins 48“ x 38“ x 48“
|
- Dayton Fan 40“ x 18“ x 45“
|
| |
- Metal table w/outlet 36“ x 23“ x 33“
|
- Steel table w/outlet 36 x 23 x 32
|
- Uline desk/cart 35“ x 29“ x 50“
|
- Uline desk/cart 35“ x 29“ x 50“
|
- Metal table 65“ x 30“ x 34“
|
- Standing desk 54" x 30“ x 35"
|
- Rolling tool cart 64“ x 25“ x 61“
|
- Hytrol conveyor 155“ x 14“ x 25“
|
- Tool table with fluorescent light, 82“ x 31“ x
|
- Tool Table with fluorescent light, 82“ x 31“ x
|
- Tool Table with fluorescent light, 86“ x 31“ x
|
- Warehouse mats, up to 118"
|
- 4 gal Porter cable shop vac
|
- 4 gal Porter cable shop vac
|
- 5 gal Porter cable shop vac
|
| |
| |
| |
- Industrial shop vac, extra hose, missing wheel!
|
- One PWR cordless Hoover shop vac, one battery and
|
- Metal lift table with electrical outlet, 73 x 37
|
| |
- Steel table 6‘ x 34“ x 30“
|
- Steel table 6‘ x 34“ x 36“
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
- 24" Dayton fan, needs repair!
|
| |
| |
- Maxess 30" fan, does not work!
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
- Uline 75" x 24’ extendable roller table
|
| |
| |
| |
- 2 wire, shelving units, has plastic stuck to it!
|
| |
- 2 Material carts 37" tall
|
| |
| |
- Step ladder/platform 2‘ x 55“ x 43“
|
- P&D spill containment rack/pallet 55“ x 50“ x 53“
|
- P&D spill containment rack/pallet 55“ x 50“ x 53“
|
- Stepstool and moving cart
|
| |
| |
| |
| |
- Platform jack/cart, platform is 32“ x 20“
|
| |
- Platform jack/cart, platform is 32“ x 20“
|
| |
| |
| |
| |
| |
| |
| |
- 40" tall cardboard pallet bins (11)
|
- 40" tall cardboard pallet bins (25)
|
- 40" tall cardboard pallet bins (23)
|
- 40" tall cardboard pallet bins (28)
|
- 40" tall cardboard pallet bins (40)
|
- 40" tall cardboard pallet bins (26)
|
- 40" tall cardboard pallet bins (55)
|
- 40" tall cardboard pallet bins (40)
|
- Porter cable 4 gallon shop vac
|
| |
| |
| |
- 36" safety globes/mirrors
|
- 2 wooden tables 36“ x 30“ x 30“
|
- 12’ x 42" x 102" pallet racking, 10 uprights and
|
- Pallet racking, 12‘ x 42“ x 8’ sections (12) 12’
|
- Air cooling table 97" x 49“x 34"
|
- Air cooling table 97" x 49“x 34"
|
- 2 sections of roller track, 10 feet and 5 feet
|
- 2 sections of roller track, 10 feet and 5 feet
|
| |
| |
| |
| |
| |
| |
- 1/2 HP nonsubmersible transfer pump
|
- 1/2 HP nonsubmersible transfer pump
|
| |
| |
| |
- 38 and 42 inch, hanging door flaps, plastic
|
| |
- 1/2 x 14 x 1, air filters
|
| |
| |
- Wash bin, no legs, paper towel dispenser
|
| |
- 3M Accu glide taping heads
|
| |
| |
| |
- Six bandsaw blades, approx 15ft
|
| |
| |
| |
- Formula 732 descaler 20 gallon
|
- Citrus degreasers 20 gallon one full, one empty
|
- Boiler cleaner, Six, misc cleaner
|
- 4 foot nylon partition, 4
|
| |
| |
| |
| |
| |
- Heating walkway mat, 5ft x 30”
|
- Industrial service solutions replacement oil for
|
- Compressor oil, 5 five gallon
|
| |
- Pallet bin full of plastic couplers
|
- 4’ 25W Sylvania lights, misc hard plastic hoses
|
| |
- Packing tape and dispensers
|
- Hydraulic pumps with blades, misc
|
| |
- Plastic tank approximately 20 gallon
|
- Wahl Digital infrared thermometer
|
- Digiset controller extrusion plastometer
|
- Uline 3” x 4” auto bag on a roll
|
- Labels and Wire ties, scale
|
- Glue guns with glue sticks
|
- Misc tags, towel dispenser
|
| |
- Miscellaneous Conduit connectors
|
- Ballasts and miscellaneous
|
| |
| |
| |
| |
- G & P machinery belt sander 4”
|
- 2’ x 2’ cart with Polly wheels
|
| |
- Standing platform with ladder
|
- Standing platform with ladder
|
- Sterling DC motor needs to be rebuilt
|
| |
- Aluminum plating, steel rod, misc
|
| |
| |
- Clariant 100% red metllic, one full, other half
|
- Neoprene wheels, various sizes
|
| |
- 2 Pallet Carts, 40 x 44 1/2
|
- 2 pallet carts, 40 x 44 1/2
|
- 3 pallet carts, 40 x 44 1/2
|
| |
- Transfer pump with barrel
|
- Hypneumat Automatic drilling and tapping unit
|
- Drill press with foot control, as is
|
- Drill press with foot pedals, as is
|
- Drill press with foot pedals, as is
|
- Drill press with foot pedals, as is
|
- Drill press with foot pedals, as is
|
- Drill press with foot pedals, as is
|
- Hytrol Conveyor Belt, 8ft x 10”
|
- Hytrol Conveyor belt, 8ft x 10”
|
| |
| |
- Wooden work benches, 9ft x 16”
|
- Wooden work benches, 9ft, various heights
|
- Dust pan, broom, 2 totes, mallet
|
- Shelving brackets 5ft, misc
|
- Condensate pumps, Vacuum bags, misc
|
- Miscellaneous, some copper wire
|
| |
- Sunlight infrared heater 4ft, 50ft cord, 220 volt
|
- Air conditioner filters, misc
|
| |
| |
- Quick connect, misc bolts
|
- 3 Chompers cutting blades, misc
|
| |
- 28” Hanna Hydraulic cylinder
|
- Conveyor belt parts, support jack
|
- Miscellaneous hydraulic accessories
|
- Hydraulic cylinder and parts, sleeve
|
- Pile of magnetek ballasts
|
- Miscellaneous copper wire
|
| |
| |
| |
| |
- Miscellaneous parts with cart, 3ft x 20”
|
- Miscellaneous parts with cart, wheel broke, 3ft x
|
- Insulating blankets, Magnetek Ballasts
|
- 6 inch stove pipe, pulleys, misc
|
- Belts, various sizes, hydraulic cylinder
|
| |
- Miscellaneous hydraulic parts
|
- Two 4 foot fluorescent lights, misc lighting
|
- Insulated blankets, corner Mirror
|
| |
- Hydraulic cylinders, as is
|
| |
- Flex conduit, Capacitor, misc
|
| |
- Miscellaneous couplers, wheels
|
- Miscellaneous hydraulic parts
|
| |
| |
- Escape ladder, air hose, tarp, misc
|
| |
- Control box, pulleys, bearings, copper valves
|
- Organizer, Scrap metal, misc
|
| |
| |
| |
| |
| |
| |
| |
- Hydraulic pumps and scrap parts including
|
- Assorted scrap metal up to approximately 10 feet
|
| |
- Steel conduit fittings up to 3 inches
|
- Square welding steel up to 24 feet etc.
|
- 1- 2 “x 5”x 20’ Rectangular steel tubing
|
- 1 - 5”x 7” x 16’ Steel post
|
- Metal conduit up to 12 feet
|
- Steel Conduit up to 10 feet and 3 inch
|
- Steel Conduit up to approximately 11 feet and 3
|
- Assorted scrap welding steel
|
- Rack on casters and assorted pipes etc. up to 25
|
- 41”x 41”x 1 1/2” Aluminum plate
|
- 2- 47”x30” x1 1/2” Aluminum plates
|
- Aluminum plate up to 1 1/2” thick
|
- 1 Pallet with assorted aluminum etc.
|
- Aluminum post 124 1/2” x 3 1/2” Square
|
- Aluminum I beam 208” x 6” x 6”
|
- Extruded aluminum etc. Up to 15’ and 6” wide
|
- 2- 82”x 35” x 8” Galvanized ductwork
|
- Steel Shafts and conduit up to 12’ and 2” Thick
|
- Angle iron brackets Up to 77” etc
|
- Assorted ready rod and 6’ screw shafts up to 12’
|
- Assorted plastic items up to 12’
|
| |
- 3- Solid aluminum planks1 1/2” x 12’
|
- Up to 12’ x 3/4” Solid aluminum planks etc.
|
- 2 Pallets with various sizes of aluminum up to 9’
|
- 5’ x2 1/2” Steel shaft and assorted metals
|
- Assorted steel rounds etc.
|
- Box with Assorted aluminum pieces
|
- Metal rack on casters with Assorted conduit and
|
- Assorted Solid shaft welding steel up to 12’
|
- Steel round shafts up to 12’ x1 1/2” and 2”
|
- 8- Square steel tubing 3”x 8’
|
- Metal rack on casters with steel angle iron etc.
|
- 1 Pallet with assorted scrap metal items
|
- Copper pipes and ground rod up to 20’ x 3/4”
|
- Perforated metal channel etc. up to 10’
|
- 1 Pallet with assorted aluminum etc.
|
- 1 Pallet with assorted aluminum etc. up to 9’
|
- 1 Bundle of metal conduit up to 10’
|
- 2”x up to 10’ steel Conduit
|
- 1 Pallet of assorted PVC conduit up to 20’
|
- 1 Pallet of assorted PVC etc. up to 4” and 10’
|
| |
- 1 Pallet with assorted PVC up to 17’ and 4”
|
- 1/2” Sheets of aluminum up to 7’ x3’
|
- Metal shop desk on casters with key
|
- Metal shop desk on casters missing key
|
- 2 Frigidaire window air conditioners Untested
|
- GE and perfect Aire Window air conditioners
|
- Nobles speed shine 1600 floor polisher Untested
|
- Double sided metal home depot shipping docks sign
|
- 8- Pallet wire Shelving 49” x 52”
|
- Pallet with assorted hydraulic hose
|
- Empty barrel pump untested
|
- 1 pallet Assorted air hose
|
| |
- 2 Metal shop stools some bent leg
|
- 6 Stack chairs etc. some torn seats
|
- 4 Blower pumps etc. untested
|
- Composite parking lot chocks up to 6’
|
- 2- 8’ x6” Square treated posts Slightly warped
|
- 56” x44” Composite pallet etc and garbage cans
|
- 6’ x5” Pallet fork extensions
|
| |
| |
- Metal hopper cabinet on casters
|
- Plastic barrel with sand blasting sand
|
- 8’ Hercules pallet fork boom
|
| |
- 1 Pallet aluminum parts etc.
|
- Pallet with wooden boxes etc.
|
- Wooden crate With air cylinders etc.
|
- 1 Pallet with machine parts
|
- Hercules pneumatic wrapping platform, 44” Square
|
- Tru Hone Knife sharpener with metal stand etc.,
|
- Hypneumat Drilling and tapping unit Untested
|
- Hypneumat Drilling and tapping unit, Untested
|
| |
| |
| |
- New US motors 7.5 hp 3ph Electric motor
|
- 4ft round sorting table, spins, 30” tall
|
- Loading platform with air hose, 48” x 40”
|
| |
| |
- Refurbished Color LaserJet pro, zebra 105sl plus,
|
| |
| |
- M & S Automated feeding system
|
| |
| |
| |
- Piovan company vacuum pumps
|
- 360 series applicator modular labeling system
|
- Fasti industrial dehumidifier
|
| |
| |
| |
| |
| |
- 12 3M Accuglide taping head
|
- 2 Mac automation concepts, for plastic beads
|
- 3 Mac automation concepts, for plastic beads
|
| |
| |
- Two 5 gal Armorseal heavy duty floor coating
|
- Eye wash station, ear plugs
|
- Super coach pro six vacuum, misc Vacuum parts,
|
| |
- 30” x 32” x 34” plastic pallet, foldable
|
- 30” x 32” x 34” plastic pallet, foldable
|
- 30” x 32” x 34” plastic pallet, foldable, plunger
|
- Metal rolling desk, no key, 34” x 51”
|
- Metal rolling desk, no key, 34” x 51”
|
- Oil heater, electric heater, lightbulbs, foam,
|
- Assorted plastic flex tubing, etc.
|
| |
| |
| |
- 3 5ft x 3ft Rubber floor mats, security globe
|
- Assorted sheets of plastic, up to 8 ft
|
- Flat steel and wire mesh steel
|
- Plastic foldable pallet, 34” x 30”, misc
|
| |
- Metal paint cabinet, 44” x 24” x 24”
|
- Filing cabinet 29”, cord saver
|
| |
| |
- Misc office supply, time recorder, printer
|
- Metal stand with air hose and foot control, 24” x
|
- Metal stand with air hose and foot control, 24” x
|
| |
- Lennox GSR14–100 heating unit
|
| |
| |
- Pallet of sure soft water softener
|
- Wolftec WRT-200 radio arm stretchwrapper, needs
|
- Bead blasting cabinet 64” tall 34” x 32”
|
- 6 foot plastic folding table
|
- 6 foot plastic folding table
|
- 6 foot plastic folding table
|
- 6 foot plastic folding table
|
- Office supplies, Howell security camera
|
- Snap on torque wrench 3/8, digital gauge
|
| |
| |
| |
- Tvs, dvd player, vhs player, projector, pyrometer
|
- Scales, white board, misc
|
| |
| |
- Plastic dump cart, very oily
|
- Plastic dump cart used for oil
|
| |
| |
- Assorted lightbulbs and light fixtures, some no
|
| |
| |
- Metal table, 5ft x 30” x 34”
|
- 10 gallon shop vac was used for oil
|
| |
| |
| |
| |
- LP tank cage 30” x 30” x 6’ LP tank, not
|
- Fairbanks, 1000 pound platform scale, state
|
