Complete Liquidation of Cardwell Container
Sale Starts
Oct 20
10amSale Ends
Nov 8
12pmTerms & Conditions
1. Registration Deposit. Auctioneer shall authorize Buyers’ provided credit card for $500 as an Auction Registration deposit. This authorization will place a 3-7 day hold on these funds with your credit card company, but will not be charged unless purchases are made.
2. Buyer’s Premium. A 15% Buyer’s premium will be added to the price of each item purchased.
3. Payment. Full payment is due by Thursday, November 9, 2017 at 4:00 PM CST. Payments can be made in the form of cash, cashier’s check, wire transfer or credit card. All international Payments must be made by wire transfer.
4. Taxes. As required by law, Auctioneer shall collect and Buyer shall pay all sales/use taxes or other applicable taxes, which will be added to the purchase price, including the buyers’ premium, on all purchased items. PRIOR TO THE CLOSE OF THE AUCTION, dealers who purchase for resale must fax to Auctioneer their resale permit numbers and complete a resale certificate, without which all applicable taxes will be charged by Auctioneer. However, sales/use taxes will be refunded in full to qualified Buyers at the time such documentation is provided to Auctioneer, provided such information is submitted within 7 days of the auction closing.
5. Bidding. All bids must be submitted using the online bidding system. Buyer is responsible to confirm their bids for accuracy. Auctioneer is providing Internet bidding as a service to Buyer using a 3rd Party Bidding System. Under no circumstances shall Buyer hold Auctioneer liable for system failures resulting in Buyer’s bid not being properly submitted. All bidding and subsequent transactions shall be in U.S. dollars. Auctioneer reserves the right add to, group, withdraw or re-catalog items in this auction, as well as adjust minimum bids and/or reserve prices and extend or shorten closing times.
6. Representations. Auctioneer makes every effort to provide accurate information about the items being sold. However, neither Auctioneer nor its Client will assume responsibility for Buyer’s assumptions or bidding errors. It is Buyers’ full responsibility to confirm the accuracy of items offered for sale. Buyers are recommended to inspect all items. Descriptions and photos are offered as a guide only. In certain cases, a photo of like product may be used to represent several different lots. Photos may also capture nearby items not listed as part of the lot. Do not rely solely on photos to make buying decisions; be sure to read descriptions. Auctioneer shall not be held responsible for such errors as posting the wrong photo for an item. When in doubt about the condition of an item, please bid accordingly.
7. All Sales are Final. A successful bid at auction, whether live or online, constitutes a legally binding contract of sale. All sales are final. There will be no refunds, returns or exchanges.
8. Removal of Items Purchased:
Buyer is solely responsible for removal and transport of all items.
All riggers, buyers or agents operating equipment for the removal of items must provide proof of adequate insurance prior to commencement of work.
All removal including any disconnections of power, water, air or any other lines or connections are to be performed in a workman like manner with proper capping as appropriate. In such cases where the item is anchored to the floor, any anchors permanently affixed shall be cut off even with the floor.
The area from which any item is removed shall be left in a broom-cleaned condition.
All items not requiring disassembly for removal are to be picked up on Friday November 10 or Monday, November 13 between the hours of 9:am and 5:pm
All items must be removed by 5:pm central time on Thursday, November 16, 2017
Failure to Remove Purchases. In the event items are not removed in the timeframes allotted, the items purchased shall be deemed abandoned and Buyer will lose any right, title or interest Buyer may have acquired and the items shall revert and repossess to Auctioneer without further notice to Buyer. Auctioneer shall also be entitled to any costs associated with the removal, storage and reselling of Buyer's items, and any other charges, fees, and expenses incurred as a result of Buyer's failure, including all attorney fees and costs incurred by Auctioneer to enforce Buyer’s obligations hereunder.
9. Failure to Pay. In the event Buyer fails to pay the entire purchase price by the payment deadline, Auctioneer may retain and/or recover, upon demand, from Buyer the required Deposit per Paragraph 1 as liquidated damages for such failure. In addition thereto, Auctioneer may, at its discretion, either resell Buyer's items at a public or private sale without further notice to Buyer and/or dispose of the item at Buyer sole expense. Any difference between the bid price for an item by the defaulting Buyer and the price received by Auctioneer at a resale shall be paid to Auctioneer by the defaulting Buyer. In addition, a defaulting Buyer shall be deemed to have granted Auctioneer a security interest in the item, which Auctioneer shall retain as collateral security for Buyer’s obligation to Auctioneer.
10. Non-Delivery. Until such time as purchased items are removed from the premises by the Buyer, Auctioneer shall have the right to cancel or void the sale of any such items purchased by Buyer. Auctioneer shall have no liability to Buyer due to the non-delivery of any purchased item other than the return of Buyer’s deposit for a canceled or voided sale item. No claim of any kind for purchased items, whether or not based on negligence, shall be greater in amount than the purchase price paid by Buyer.
11. Absence of Warranties. The condition of the items being offered varies. The Buyer understands and agrees: (1) that any description or sample of the items given or furnished by Auctioneer is solely for identification, and does not create any warranty expressed or implied, that the item actually conforms to such description or sample, (2) that Buyer or agent on Buyer’s behalf has inspected or has had the opportunity to inspect, all of the items upon which Buyer will be bidding and/or does purchase, (3) that all items are purchased and accepted by Buyer “AS IS”, “WHERE IS” and “WITH ALL FAULTS”. AUCTIONEER MAKES NO WARRANTIES OR GUARANTEES WHATSOEVER WHETHER WRITTEN, ORAL OR IMPLIED AS TO QUALITY, QUANTITY, CONDITION, USEABILITY, SALEABILITY, WEIGHT, MEASUREMENT, YEAR, MODEL, MECHANICAL CONDITION, PERFORMANCE, OR OTHER SPECIFICATIONS, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR WARRANTY AGAINST PATENT, TRADEMARK, COPYRIGHT OR TRADE SECRET INFRINGEMENT, (4) in the event there are manufacturer warranties in effect for the item purchased, Buyer must make all claims thereunder directly with the provider of the warranty. No statement or statements of any other paragraph herein shall be construed to in any way contradict the provisions of this paragraph.
12. Buyer’s Responsibility. Upon the Auctioneer's declaration of an item as "Sold", title to the offered lot shall pass to the Buyer, subject to Buyer's full payment, who shall forthwith assume full risk and responsibility for the lot. Buyer is solely responsible to provide any personnel, equipment or material needed to pick up items purchased and shall assume all responsibility for the removal of any item purchased at the sale and any and all risks associated with such removal including, without limitation, the responsibility for providing licensed, qualified and bonded professionals to ensure proper water, gas and/or power disconnection.
13. Hazardous Materials. Buyer agrees that in the event any purchased items contain environmental hazards, toxic waste or other type of hazardous material in any form whatsoever, Buyer shall provide evidence that Buyer or its representatives are licensed for such removal and shall comply with all applicable local, state and/or federal rules, laws and regulations. Auctioneer, its agents or representatives shall not be responsible for its containment, storage or removal. Buyer shall indemnify, defend and hold Auctioneer harmless with respect to all costs, expenses, liabilities, damages or claims, including attorneys’ fees, asserted by any person, entity or governmental agency or against Auctioneer directly or indirectly relating in any manner to any hazardous or toxic materials which may be regulated under applicable laws, rules or regulations and which relate in any way to the dismantling and removal of any purchased item. Auctioneer shall in no event be obligated to sell any item which contains any hazardous materials or to incur any costs or expenses relating in any manner, either directly or indirectly to any hazardous materials. Buyer shall be responsible for any and all remediation costs relating to the dismantling and removal of any purchased item containing hazardous materials.
14. Acts of Others. Persons in attendance during inspection, sale or removal of merchandise assume all risks of damage or loss to persons, property, or merchandise and shall exercise proper precautions at all times for the protection of persons and property and shall comply with all safety and health requirements as directed by Auctioneer, and local, state and federal regulations. Neither Auctioneer, its agents, its employees or representatives shall be liable by reason of any defect in or about the condition of the premises on which the auction is held. Buyer specifically releases Auctioneer, its agents and representatives from all liability thereof.
15. Limits of Liability. In no event shall Auctioneer’s liability to Buyer exceed the purchase price actually paid for an individual item or lot. A Buyer’s claim shall be limited to the amount paid for the merchandise, and shall not extend to any obligation, risk, liability, right, claim, remedy for loss of use, revenue or profit, liability of Buyer to any third party, personal injury, or any other direct, indirect, incidental or consequential damages. Buyer further acknowledges that each item it purchases at the sale represents a separate transaction, and that no one transaction shall be conditioned upon another transaction. Buyer hereby holds Auctioneer harmless from: (1) the acts or omission of any party who provided any items to Auctioneer for sale, (2) the acts or omission of the owner or Lessor of the auction site or the site where the auctioned items are stored, (3) any claims Buyer may have against Auctioneer, Auctioneer’s client(s) or any former owner of the property being sold, (4) Buyer’s failure in any way to properly inspect items and/or fulfill its obligations per the terms and conditions of the sale, as indicated within this document or as announced by Auctioneer at the time of sale. In the event Buyer provides a deposit or payment using a Credit Card, Buyer acknowledges that it is purchasing under the As-Is, Where-Is terms of the auction and that Buyer shall waive all rights of charge back based on any claims of misrepresentation, non-delivery or non-performance.
16. Right of Removal. Auctioneer reserves the right to remove any person from the auction site and to refuse that individual’s bid, whether offered live, by proxy or by internet. In such event, any outstanding deposit will be immediately returned.
17. Indemnification. Buyer shall indemnify, hold harmless and defend Auctioneer, owners and building owners from and against any and all losses, damages, liabilities and claims, including attorney fees, costs and expenses arising out of based upon or resulting from: (1) failure to secure all safety equipment and to meet all applicable government safety standards in removing items purchased or used by Buyer, (2) failure to comply with safety instructions issued to Buyer from Auctioneer, (3) any act or omission of Auctioneer, owners, building owners or their respective agents, representatives or employees, relating to or affecting the items bid on or purchased by Buyer, (4) the claim of any third party claiming or challenging title to any items purchased by Buyer or claiming infringement of any proprietary interest, (5) the claim of any person resulting from Auctioneer offering for sale or selling the items purchased by Buyer, (6) any injury to Buyer or any other person or property of any type whatsoever caused during the inspection, dismantling, removing or transporting of items purchased by Buyer.
18. Bidder’s Number. The bidder’s number or username is nontransferable. All bids made using the bid number or username will be the responsibility of Buyer.
19. Governing Law. The validity, construction and performance of these Terms of Sale shall be governed by the substantive law of the State of Tennessee as applied to agreements among Tennessee residents entered into and to be performed entirely within Tennessee, without giving effect to its conflict of laws provisions. The prevailing party shall be entitled to reimbursement by the losing party of all statutory and non-statutory costs and expenses, including, but not limited to, reasonable attorney fees.
20. Severability. If any provision of these Terms of Sale is deemed to be illegal, invalid, or unenforceable, the legality, validity, and enforceability of the remaining parts shall not be affected.
Kennedy’s Auction Service LLC.
Description & Details
ONLINE ONLY AUCTION
Complete Liquidation of Cardwell Container
Bidding Ends November 8 Starting at 12:00 PM
835 Herbert Road, Cordova, TN 38018
Inventory:
1 Thoreson McCosh Loader/Mixer Controler
2 Cyclone and Tank - Approx 1500 lb. Capacity "Green"
3 Cyclone and Tank - Approx 1500 lb. Capacity "Green"
4 Cyclone and Tank - Approx 1500 lb. Capacity "Blue Tank, Green Cyclone"
5 Cyclone and Tank - Approx 1500 lb. Capacity "Blue"
6 Cyclone and Tank - Approx 1500 lb. Capacity "Green"
7 Cyclone and Tank - Approx 1500 lb. Capacity "Red Tank, Tan Cyclone"
8 Cyclone and Tank - Approx 1500 lb. Capacity "Green"
9 Cyclone and Tank - Approx 1500 lb. Capacity "Blue, Brown Cyclone"
10 Tank With CONAIR Loader, Blender And Controler - Approx 1500 lb. Capacity "Green"
11 Tank With CONAIR Loader, Blender And Controler - Approx 1500 lb. Capacity "Green"
12 Tank With Loader And Control Box - Approx 1500 lb. Capacity "Green"
13 Tape Table - Leeson Motor, No Head
14 30 Hp GE Motor - Still In Plastic, Appears Unused
15 CONAIR Self-contained Vaccuum Loader And Pallet Co - CONAIR Self-Contained Vaccuum Loader And Pallet Contents, Wooden Box Containing Various Sized Chain
16 Siemens Transformer and Pallet Contents - Seimens Transformer and Pallet Contents, Contains Box of Diverters and Misc Parts
17 Thoreson McCosh Loader and Pallet Contents - Includes 62" Cooling Sleeve
18 Three Section Roller Landing - Measures Approx 63"W x 14"H
19 Loader Motor
20 3M-Matic Tape Machine - Model 38700
21 3M-Matic Tape Machine - Model 120A, Owner's Manual and Documentation Included
22 ITW Signode Spiral Grip Shrink Wrapper, 500 Series - Includes Operation, Parts, and Safety Manual, Two Section Roller Platform Attach To Turn-Table
23 WULFTEC M. J. MAILLIS Shrink Wrapper, Smart Series - Elevated Turn-Table
24 Pallet of Box Dies - Pallet of Box Dies
25 Pallet of Electrical Boxes - Pallet of Six Westinghouse Fusible SW Plug-in Units, Appear Unused
26 Pallet With Two Motors and Box of Three-Phase - Cord Ends
27 MC Molds DST 2000 Spin Trimmer - MC Molds DST 2000 Spin Trimmer, Includes Manual and Documentation
28 Pallet With Loader and Blower Motor With Controler - Pallet With Loadeer and Blower Motor With Controler
29 AIS Leak Detector - Auto Adjust III, Includes Manual and Documentation
30 Hydraulic Manifold and Control Valves
31 Bottle Flamer - Homemade Bottle Flamer
32 Pallet of Box Dies - Pallet of Box Dies
33 Blower - Blower With Baldoor-Reliance Super E Motor
34 Grinder - R.S .Coporand, Includes Documentation
35 Conveyor - 15' x 18" +/- Conveyor on Wheels By PlasticProcess Equipment, Inc., Includes Documentation
36 Conveyor - 12'6"x 12" +/- Conveyor On Stand With Motor, No Belt
37 Bottle Guide - 4 Station Stainless Steel Bottle Guide
38 Plastic Roller Conveyor Belts - Box of Plastic Conveyor Belts With Varying Sizes
39 Compression Chamber and Carton Sealer With PRO BLU - Manuals and Documentation Included
40 Coveyor Belts - Pallet of Heavy Conveyor Belts - 18" and 24" Wide
41 Blower - Control Box - No Motor
42 Grinder - Has Custom-Fit Sound Dampening Boxes and Controler
43 Grinder with Auger - Dodge Grinder With Auger and Control Box, Includes Documentation
44 AIS Auto-Adjust IV Leak Detector - AIS Auto-Adjust IV Leak Detector With Manual and Documentation
45 Bottle Trimmer - Bottle Trimmer
46 Grinder with Auger - Grinder With Auger and Sound Dampening Box and Controler
47 Label-Aire Label Machine Model 2111M - Includes Operator's Manual
48 Label-Aire Label Machine Model 2111 - Label-Aire Label Machine Model 2111
49 Conveyor - 12"x 77" +/-
50 Conveyor - 20'x 14" +/-
51 Two- Belt Conveyor - 9"W x Overo-All Length of 15' +/-
52 Elliot Standard Model 6600 Case Sealer - Includes Documentation, Model Plate on Machine Reads 66118
53 Carton Sealer With PRO BLUE 7 Adhesive Melter - Carton Sealer With PRO BLUE 7 Adhesive Melter
54 Compression Chamber - Over-All Length 10' +/-
55 Carton Sealer With Nordson Adhesive Melter - Includes Manual
56 Carton Sealer With Nordson Adhesive Melter - Includes Manual, Nordson Model HM V
57 Compression Chamber - Standard Knapp, Type Number 457
58 Bottle Trimmer - Single Bottle Trimmer
59 Lyle Development, Inc. Bottle Trimmer - Single Bottle Trimmer
60 Auto Adjust III Leak Detector - Includes Manuals
61 Conveyor - 10' x 4.5" +/- Plastic Chain Conveyor
62 Conveyor - 12' x 7.5" +/- Steel Chain Bottle Conveyor
63 Conveyor - 9' x 12'' +/- Conveyor
64 Signode Tape Machine - UCS-2024HD
65 Automated Bottle Trimmer - Ziegler Engineering Company, Inc. Bottle Trimmer
66 Conveyor - 10' x 4.5'' +/- Plastic Chain Conveyor
67 Conveyor - 10' x 4.5'' +/- Plastic Chain Conveyor Without Motor
68 Conveyor - 10' x 15'' +/- Belt Conveyor
69 Leak Detector and Conveyor - 10' x 4.5'' Plastic Chain Conveyor, Auto Adjust II Leak Detector
70 Conveyor - 10' x 4.5'' +/- Plastic Chain Conveyor
71 Conveyor - 10'6'' x 14'' +/- Conveyor, No Belt
72 Motorized Roller Conveyor - 20' x 12'' +/- In Two Sections
73 Conveyor - 10' x 4.5'' +/- Plastic Chain Conveyor
74 Conveyor - 6'x7.5" +/- Plastic Chain Conveyor
75 Stainless Steel Tub on Stand With Chute - 3'L x 2'W x 10''Deep +/-
76 Conveyor Parts
77 Split Conveyor - 11' x 5'' +/- With Dayton DC Speed Control
78 Split Conveyor - 11' x 5'' +/- With Dayton Speed Control
79 Split Conveyor - 6' x 5'' +/-, No Motor
80 Split Conveyor - 9' x 6'' +/- Includes Motor
81 4'' Conduit and Sheet Metal
82 Foremost Grinder - Plastic Grinder With Control Box, Model SHD6
83 Grinder with Auger - Cumberland 14 x 20 Grinder With Auger, Auger Appears Unused
84 Auger - Appears Unused, Still On Pallet, 16''Deep x 6'Long +/-
85 Auger - 6'' x 3' +/-
86 Sound Dampening Box - Overall Approx 68'' Long x 52'' Wide x 68'' Tall
87 Box Dies and Foam Insulation Tubing - Includes Two Wall Surround On Rollers and Vaccuum Barrel
88 Sound Dampening Box - Overall Approx 8' Long x 56'' Wide x 74'' Tall
89 Sound Dampening Box With Control Box - Overall Approx 66'' Long x 41'' Wide x 69'' Tall
90 Hydraulic Pump With Tank and Accumulater - Parker Hydraulic Pump With Tank and Accumulater
91 Sound Dampening Box - Overall Approx 42'' Long x 32'' Wide x 44'' Tall
92 AIS Leak Detector Auto Adjust III - Includes Manual
93 Roach Motorized Roller Conveyor - Roach Motorized Roller Conveyor With 180 Turn, Includes Documentation
94 Wheel Roller Conveyors - Approx 35' Straight + Two 90 Degree Curves
95 HydroStar MRH- 95SW- 3 Hydraulic Motor - New, In Packaging, Includes Documentation and Manual
96 Assorted Pallet - Includes Hydraulic Equipment and Mounting Materials, Also Includes Dayton Motor and Gear Box
97 Pallet With Bottle Mold Head - Pallet With Spin Trimmer Head and Baldoor Motor
98 Pallet of Hoses - Assorted Hoses, Hydraulic and Air
99 Pallet of Assorted Blow Mold Machine Parts - Includes Oilgear Hydraulic Pump, Manifold With Vickers Valve and Cabinet With Parts Including Bottle Jack
100 Pallet With Vaccuum Pipe Parts - Assorted Vaccuum Pipe Connectors, 90's and Cuplings
101 Pallet With Motors and Blower Parts - Pallet with Motors and Blower Parts
102 Pallet With Blower and Guard and Parts
103 Misc Pallet With Control Boards - Includes Control Boards, Vents and Misc Parts
104 Conveyor - 23'' x 14' +/-, With Dayton DC Speed Control, Includes Documentation
105 Misc Parts Pallet - Trimmer Parts
106 Pallet of Motors - Three Motors, Reliance and Baldor With Relialube Gear Boxes, Winsmith 924 Speed Reducer
107 Pallet of Cylinders and Misc Parts - Misc Air Cylinders, Electrical Box and Buttons
108 Pallet of Motors - 5 Motors: 2 Baldor and 3 Dayton, All Appear Unused, Includes Pump and Gear Box
109 Pallet of Misc Parts - Misc Parts Including Trimmer Parts
110 Pallet of Electrical Wire- Copper
111 Pallet Racking - Includes Nine Uprights 16' Tall x 44'' Deep and 42 +/- 8' Rails
112 Pallet Racking - Includes Five Uprights 12' Tall x 42'' Deep and 16 +/- 8' Rails
113 Pallet Racking - Includes Seven Uprights 10' Tall x 44'' Deep and 22 +/- 8' Rails
114 Walkway Floor - Four 2' x 20' Walkway Floor
115 Walkway Floor - Two 2' x 20' Walkway Floor
116 Banding Cart - Banding Cart With Tightener, Crimper,and Clips
117 Signode Banding Carts - Two Banding Carts With Tightener, Crimper, and Clips
118 Drafting Table - Drafting Table
119 TPI Industrial Fan - TPI Industrial Fan Parts
120 Maxess Industrial Fan - Maxess Industrial Fan On Stand
121 Dayton Industrial Fan - Dayton Industrail Fan On Stand
122 TPI Industrial Fan - TPI Industrial Fan On Stand
123 TPI Industrial Fan - TPI Industrial Fan On Stand
124 Pallet With Valves, Control Box and Plexi-glass
125 Pair of Forklift Forks
126 Pair of Forklift Forks - Made In Germany
127 Ingersoll Rand Oil Pump - Includes Filters and Hose and Documentation
128 Teel Jet Pump - Teel Jet Pump With Dayton Motor
129 Oil Drums - Two Oil Drums Labeled As Hydraulic Oil,Texaco Rando HD 68, One Empty and Other Appears Half Full
130 Palleet of Assorted Guards and Sheilds and Steel - Conveyor Chain
131 Electric Motor With Dual Hydraulic Pumps
132 Separator - Pallet With Separator and Cincinatti Dust Master Blower
133 Pallet of Cylinders - Pallet With Misc Cylinders and Parts
134 Two Banding Carts - One Signode Banding Cart and One Nondescript Banding Cart
135 Blower Parts - Includes Two Motors
136 Pallet Blower Parts - Pallet of Blower Parts With GE Motor
137 Loader - Loader With Talk Top and Flanges
138 Pallet of Misc Parts - Misc Parts Including Bolts, Blow Pins, Striker Plates, and Dies
139 Pallet of Tufftape Sealing Tape - Aprox 70 Rolls [7 Cases]
140 Pallet of Hot Melt Adhesive - Twelve Cases of Vin Sko Bond Hot Melt Adhesive By Pioneer Adhesive Products of America Corporation
141 Pallet of Misc Steel - Varying Lengths and Style
142 Pallet of Misc Sheet Metal - Mostly Stainless, Also Includes Expanded Steel andStainless Steel Tank
143 Sheet Metal - Pallet of Sheet metal
144 I- Beams - Pallet With Three I-Beams and Other Metal
145 Pallet of Misc Tie Rods and Platen - Platen
146 Pallet of Misc Continuous Excrusion Screws - Includes Barrel
147 Plywood - Pallet of Plywood
148 Wood Work Bench and Desks - Two Desks and One Wooden Work Bench, Includes One Desk Chair
149 Lumber - Pallet of Varying Size Lumber
150 60,000 Lb. +/- GSI Silo/Material Tank - Approx 27' Overall Heighth x 12' in Diameter, Must Be Dissassembled For Removal
151 60,000 Lb. +/- CHORE-TIME Silo/Material Tank - Approx 27' Overall Heighth x 12' in Diameter, Must Be Dissassembled For Removal
152 Set Of Four Industrial Equipment Moving Rollers - Two-Handled Equipment Rollers By Hilman
153 Contents of Two Sections of Shelves - Includes Pipe Fittings, Hose Fittings , Blower Motor, Time Clock
154 Contents of Three Sections of Shelving - Includes Misc Electrical Parts, Switches, Control Boxes, Breakers, Receptacles
155 Five Sections of Shelving - 15'4'' Overall Length x 8'3'' Heighth +/-
156 Contents of Two Sections of Shelves - Includes Switches, Valves,
157 Contents of Three Sections of Shelving - Includes Clutches, Gears, Hydraulic Valve, O- Rings,
158 Contents of Two Sections of Shelves - Includes Hydraulic Valves, Parts, Filters, etc.
159 Contents of Three Sections of Shelving - Includes Drive Chain, Sprockets, Bearings, Screens, etc.
160 Contents of One Shelf - Includes Electrical Fuses, and etc.
161 Contents of One Shelf - Includes Striker Plates and Misc
162 Contents of One Shelf - Include Bolts, Anchor Bolts, Misc Fasteners and Organizer Bin
163 Seven Sections of Shelving - 21'5'' x 8'3'' +/-
164 Six Sections of Shelving - 18'4'' x 8'3'' +/-
165 Heater Bands - Includes Misc Heater Bands and Shelving
166 Metal Frame Work Table With Wood Top - 6' L x 2' D x 38'' T
167 Conduit Fittings and Shelf - Heavy Steel Shelving Unit With Conduit Fittings, Roll of Flexible conduit, etc. Shelf Measurements: 46.5''w x68'' T x 22.5'' d +/-
168 Shelf and Contents - 10'4'' L x 5' 8'' T x 32'' D +/-, Includes Contents of Filter Media, Tie Rods, Pump, etc.
169 Shelf and Contents - 10'1'' L x 6'5''T x 32 W +/-, Includes Filter Material, Hot Knife Blades, C- Clamps, etc.
170 TPI Industrial Fan - TPI Industrial Fan On Stand
171 Maxess Industrial Fan - Maxess Industrial Fan On Stand
172 Surface Grinder - Rockwell Surface Grinder
173 Bottle Flamer - Bottle Flamer with Pipes and Regulators
174 Pile of Cord - Pile of Extention Cords
175 Loader Motors and Shelf Contents - Shelving Unit With Loader Motors and Misc Contents
176 Metal Desk - Metal Desk and Any Contents
177 Eight Buckets - Some Empty, Some With Contents
178 Wooden Work Bench - Has Bench Grinder Attatched, Includes Misc Tools
179 Wooden Work Bench - Has Bench Grinder Attatched
180 Contents on Work Bech - Includes Maco IIIB/AMD Programmer, Model A58B, and Circuit Boards, Eprom-Erasing Ultra- Violet Lamp
181 Bottle Flamer - Bottle Flamer With Foot Peddle
182 Three Buckets of Progressive Adhesives, Inc. - Appear Unopened
183 Bucket of Mobil 80W - 90 Gear Oil
184 Shop Cabinet With Contents - 3'W x 6'6''T x 18''D +/-, Contents Include Grease, Hard Hats, Aresol Paint, Gaskit Material, etc.
185 Metal Shelf - 3'w x 6'3''T x 1'D +/-
186 Shelving Contents - Includes Motor Oil, Power Steering Fluid, Engine Degreeser, Gas Can, Mop Head, etc.
187 One Shelf - 4' x 7' x 18''deep +/-
188 Contents of Three Sections of Shelving - Includes Industrial Outdoor Light, Time Clock Parts, Bottle Trimmer Parts, Motor, Stroke Shaver Golf Practice Net
189 Three Sections of Shelves - 3'W x 85''T x 18''D +/-, Each
190 Shelf and Contents - 36.5''W x 87''T x 18''D +/-, Contents Include Cleaning Supplies
191 Computer Desk With Chair - Includes Contents of First Aid Kits
192 Four Door Locker
193 Three Door Locker
194 Two Locker Units - One Single Locker, One Double Door Locker
195 Scales - Exact Wait Manual Scales
196 Four Towel Dispensers - Includes Three Large Roles of Tape
197 Maytag Clothes Washer - Includes Extra Drain Pipe
198 Shelf and Contents - Includes Gaskit Material, Blow Pin, Speakers, Filters, Switches, etc.
199 Four Drawer Metal Filing Cabinet, Metal Desk, - Includes Chairs and Tv Stand
200 Contents On Desk - Includes two Wikall Tempurature Gauges, In-Line Filters, Refrigeration/Air- Condition Handbook and Dictionary
201 Pyramid 4000 HD Time Clock - Includes Time Card Slots
202 Three Break Room Tables With Six Chairs Each By - Plymold
203 Cold Drinks Vending Machine
204 Vendo Vending Machine
205 Snack Vending Machine
206 Two Foot Lockers - Contain Thirty Lockers Each
207 Mop Buckets - Includes Mops
208 Two Shelves
209 Shelving Unit/ Rack
210 Contents on Table - Includes Weldin Clamp, C- Clamps, Polyurethane, etc.
211 Stainless Steel Table - 50''L x 24''W x 39''T
212 Roof Coating and Patch - Two Buckets of Henry SOLARFLEX 287 SF Roof Coating and Rolls Of All Purpose Flashing and Peel and Seal
213 Heavy Steel Shelf - 98''L x 48''T x 28''D Overall
214 Metal Band Saw - Carolina Tool and Equipment Metal Band Saw With Material Stand and Documentation
215 Drill Press - Delta 14'' Dril Press
216 30 Ton Press - 30 Ton Carolina Press
217 Work Table Contents on First Shelf of Workbench - Includes, Floor Jack, Bottle Jack, Small Vise, Punch Sets, Bolt Cutter, Shrink Wrap Handle, Chain , etc.
218 Work Table With Large Vise - 10'L Work Table
219 Pipe and Tubing Benders - Five Total Benders
220 Dayton Oil Fire Heater - Dayton Oil-Fired 110,000 BTU
221 Engine Hoist - Carolina Engine Hoist Shopline 4000
222 Aluminum Ladder - 12' Section of Aluminum Ladder
223 Rack of Piping - Metal Piping of Various Lenghts, Widths, and Thicknesses, Rack Not Included
224 Metal Rack - 13'Long, Four Shelf, Heavy Metal Rack, Does Not Include Contents
225 Metal Shelf and All Contents - Includes Pipe Fittings, Steel and Copper, and High Pressure Buckets
226 Three Barrels, One Barrel Rack, - One Barrel Contains Small Amount of Fluid Marked As Paratherm Heat or Transfer Fluid, Other Contains Fluid Marked As Mineral Spirits Rule 66, Hydraulic Barrel Empty
227 Two Oil Tanks - Two Approx 250 Gal Oil Tanks, One Labeled Good Oil Moslty Empty, One Labeled Used Oil Approx Half Full
228 Group of Jugs and Buckets - Labeled Aquaphase R-Tec-ASM-, ''See Photographs
229 Parts Washer - Handi Kleen Parts Washer
230 Wheel Barrow, Cart and Spreader - Includes Four Sections of Vent Pipe
231 Garden Hoses - Approx 200'
232 Steam Cleaner - Dayton Hot Water Washer
233 Barrels - Group of Nine Barrels and 6" Drain Pipe and Large Tarpauline
234 Group of Buckets and Jugs and Gas Cans - Any Contents Included, Includes Wooden Table
235 Portable Steps
236 Pallet of Steel - Varying Lengths and Types of Mostly Unused Steel, Up To 24' In Length
237 Ridgid Pipe Threader - Includes Dies, Handle, Clamp, and Bender
238 Box of Flexible Vaccuum Hose
239 Vaccuum Pipe - Various Lengths and Diameters of Lightweight Vaccuum Pipe , Also Includes Small Amount of Ridgid Pipe, Shelf Not Included
240 Metal Rack - 10'L x 55''T x 2'D +/-
241 Welding Table and Contents - on Wheels With Brake, Includes Welding Rods, Chipping Hammer, Striker, And Torch Tips
242 Torch Cart - Includes Hoses And Tips
243 Table With Vise - Steel Frame Table With Wood Shelves, Mounted Vise and Tool Cabinet
244 Chain With Two Hooks - 20 Feet In Length
245 Contents on Table Top - Includes Grease Guns, Bottle Jacks, Abrasive Wheels, Cordless Drill, Roofing Screws, Pipe Wrench, Aresols, etc.
246 Contents of Lower Shelf - Includes Jack Stand, Hydraulic Fittings, Flexible Conduit, Gaskits, etc.
247 Heavy Steel Frame Table - Mounted Pipe Vise, 12'L x 42''W x 3'T
248 Two Heavy Steel Bars - Both Have Warping
249 Two Shelving Units and Contents and Stool
250 Workbench with Bench Grinder - Heavy Wooden Workbench ith Craftsman Bench Grinder Overal Measurements on Workbench 69"L x 37"W x 37.5"T +/-
251 Table with Contents - Small wooden Table /Bench with contents including Hoses and Misc. Fittings
252 Pipes - Pile of Pipes in Various Lengths, Diameters and Thicknesses
253 Loader Hoppers - Four Loader Hoppers - Three CONAIR Brand
254 Portable Steps - Three-Step Portable Steps with Rails
255 Scales - Platform Scales - Detecto
256 Hand-Cart/ Dolly - Two Wheel Hand Cart
257 Evolution Printer - Model C21030 Evolution Conveyor Line Bottle Printer - Used to Print Dates on Bottles. Includes two ink cartridges and CD.
258 Matrix Printer - Model 9000 Kiwi Matrix Printer
259 Banding Cart - Banding Cart with Banding, Tools and Clips
260 Bolt Bin with Contents - Bolt Bin on Stand Stocked with Socket Head Cap Screws
261 Pallet of Wire and Cord - Pallet of Wire, Cord and Copper Pipe.
262 Bolt Bins - Two Bolt Bins - One Stocked with Pipe Fittings the other with Socket Head Cap Screws and Misc
263 Banding Tools - Pallet of Banding Tools - Crimpers, Tighteners (electric and manual) and Clips
264 Banding and Tools - Pallet of Banding Tools - Crimpers, Tighteners (electric and manual) Clips and Banding
265 Cylinders - Pallet of Cylinders, Cylinder Repair kits, Etc
266 Bottle Trimmer Bottle Seats - Bottle Seats for Varying Size Bottles for Bottle Trimmer
267 Hoses - Pallet of Air Hoses and Some other Hose
268 V-Belts - Pallet of Miscellaneous V-Belts
269 Electrical Supplies - Pallet of Electrical Supplies - Switches, Contacts, Controllers, Etc
270 Clamps - Crate of Hose/Pipe Clamps
271 Pipe and Hose Fittings - Pallet of Pipe and Hose fittings - Hydraulic, Air, Etc
272 Striker Plates - Blow Tips - Pallet with Striker Plates, Etc
273 Industrial Fan - Dayton Industrial Fan On Stand with Extra Stand and Guard
274 Refrigerant Recovery - Pinacle Model: 1000 CB Refrigerant Recovery Unit with two Refrigerant Tanks
275 Angle Drill - Black and Dcker 1/2" Angle Drill with Case
276 Cart - Heavy 4-Wheel Cart - No Contents
277 Fire Extinguishers - Four Fire Extinguishers
278 3-PH Electrical Plugs - Group of Electrical Plugs - Mostly 3 PH - Some Heavy
279 Cart - Heavy 4-Wheel Cart - No Contents
280 Heat Controls - Heat Controls - Some in Plastic - Includes Some Documentation/Manuals
281 Sand Blaster - SPEEDAIRE Sandblasting Unit with
282 C-Clamp - Heavy C-Clamp
283 Copper Pipe and Fittings - Copper Pipe and Fittings
284 Servo Valves - 6 Servo Valves
285 Pullers and Reamers - Box of Pullers and Reamers
286 Socket Head Cap Screws/Bolts - Box of Socket Head Cap Screws, Washers Etc
287 Cart - Heavy 4-Wheel Cart - No Contents
288 PVC Curtain - One Roll and One Partial Roll of PVC Curtain
289 Chair - Bar Height Office Chair
290 Vacuum Pump - Pneumotive Vacuum Pump with Motor - Appears Unused
291 Hydraulic Pump - OILGEAR PVG Hydraulic Pump - Unused
292 Hydraulic Hoses - Pallet of Hydraulic Hoses - Misc Sizes
293 Electric Motos and GearBoxes - Pallet of Electric Motors and Gearboxes. Some Attached Some Separate
294 Electric Motors - Pallet of Electric Motors - Some Appear Unused - GE, Dayton, Reliance
295 Hydraulic Motors - Pallet of Hydraulic Motors, Pumps, Cylinder, Flow Control Valves, Gearboxes, Etc
296 Hydraulic Pumps and Gearboxes - Pallet of Hydraulic Pumps, Gearboxes, Etc
297 Grinder/Granulator Blades - Pallet of Grinder/Granulator Blades - Some Unused
298 Industrial Fan - Industrial Fan on Stand
299 Loader Controls and Electrical Boxes - Pallet of Loader Controls, Electrical Boxes, Etc. CONAIR - Whitlock - Westinghouse
300 3-PH Extension Cord - Heavy 3-PH Extension Cord - 12' Long +
301 Wiring and Tubing - Pallet of Wire, Various Guages and Strands - Also includes Copper Tubing
302 Conveyor Belt - Pallet of Conveyor Belting
303 Conveyor Chain - Pallet of Plastic Conveyor Chain
304 Capacitors for Ind. Lighting - Box of Capacitors for Industrial Lighting and Electrical Boards
305 Filters - Group of 6 - 20 Micron Filters.
306 Ramps - Set of Automobile Ramps and Manual Treadmill
307 Electric Motor With Gearbox - US Motors 1 Hp Electric Motor with Gearbox
308 Dies and Misc - Pallet of Dies, Mandrals, Diverters, Mandrels, Etc.
309 Dies and Mandrals - Pallet of Dies and Mandrals
310 Molds - 4 One Gallon Industrial Round Molds
311 2 Molds - 2, One Liter Round Molds attached as a single set
312 4 Molds - 4, 33 Oz. Squat Trigger Molds
313 2 Molds - 2, 2 Gallon Molds with Inserts for 2-1/4 and 2-1/2 - With Blowpins F Style
314 2 Molds - 2, Two Bottle 33 Oz. TallTrigger Molds With Detabber
315 4 Molds - 4, One Gallon F Style Slant Handle Molds
316 4 Molds - 5, 2.5 Gallon F Style Molds With Blow Pins
317 6 Molds and Inserts - 4, 32 Oz. Sun Pine Logo Trigger Spray Bottles and 2, 1 Quart Round Cylinder plus Inserts for Additional Sizes
318 4 Molds - 4, 1 Gallon Round Cylinder Molds
319 3 Molds - 1, 2.5 Gallon Squat F-Style and Two Bottle Molds plus additional Parts
320 2 Molds - 2, F-Style Slant Handle for Pump Insert
321 8 Molds - 8, 1 Gallon Kraft Cooking Oil Type w/ Handleware
322 6 Molds - 6, 64 Oz. Bottle Molds w/ Handleware - 2 Have Straight Ribs and 4 Have Slant Ribs
323 4 Molds - 4, 1 Gallon Kraft Type w/ Handleware
324 Backplates, Misc Pallet - Misc Backplates and Heater Jacket Part
325 Heater Jackets - Pallet of Varying Size Heater Jackets
326 Heater Jackets - Heater Jacket Parts - Appear Unused
327 CONAIR Loader - CONAIR Loader w/ Control Box
328 Loaders and Cyclone - Pallet w/ 2 Loaders, 1 Cyclone and Whitlock Control Box
329 Blower, Glue Bucket, Vacuum - Two Pallets, Include Blower with Baldor Motor, Material Hopper, Valco Cincinatti Glue Bucket, Dayton Industrial Vaccum, Switch Boxes
330 Dock Springs - Pallet with Dock Springs and Misc
331 Conduit Parts, Rotational Actuator - Two Pallets include Electrical Conduit Parts, Rotational Actuator, Linkage Pins, etc
332 Trays - 4 Takeoff Trimmers Trays on Metal Stands
332a Trays - 4 Takeoff Trimmers Trays on Metal Stands - One Extra Stand
333 Palletizers - 6 Palletizers with Roller floors and side stands
334 File Cabinets, Desks - 4 Filing Cabinets, Desk with Hutch, Desk w/ Cordenza
334a Conference Table and Chairs - 10' Conference Table w/ 8 Chairs
334b Desk and Chair - Desk w/ Cordenza and Chair
335 Compressed Air Tank - Overall Height 6'4" +/-
336 Wooden Ladder - Wooden Ladder with Small Platform and Small Step Stool with Broken Step
337 Tank Set - Set of Two Materials Tanks - One Has CONAIR Loader and Mixer, the other has Cyclone
338 Work Cart - Steel Frame Work Cart with Brake
339 Tank Set - Set of Two Materials Tanks - One Has CONAIR Loader and Mixer with CONAIR AUTOCOLOR Control, the other has Cyclone
340 Tank Set - Set of Two Materials Tanks - One Has CONAIR Loader and Mixer with CONAIR AUTOCOLOR Control, the other has Cyclone
341 Compressed Air Tank - Overall Height 6'4" +/-
342 Tank Set - Pair of Large Thoresen McCosh Material Tanks with Loaders and Controler
343 Compactor/Baler - General Hydraulics Cardboard Compactor and Baler, Model: 314-6OL-17
344 Forklift Dumpster - Roura Hopper Forklift Dumpster
345 Conveyor with Turn - Plastic Chain Conveyor - Approx 23' Straight and 78" at 90 Degree Turn
346 Conveyor with Turn - Plastic Chain Conveyor - Approx 23' Straight and 78" at 90 Degree Turn
347 Baker Blow Mold Machine - Baker Two Head Blow Mold Machine
348 Heat Exchanger - Thermolator Heat Exchanger
349 Battenfeld Fischer Blow Molding Machine - Battenfeld Fischer Two Head Blow Molding Machine
350 Heat Exchanger - Mokon Heat Exchanger
351 Table and Step - Table with contents on Top and Step Stool
352 Baker Blow Mold Machine - Baker B-75 Blow Mold Machine - 4 heaad
353 Heat Exchanger - Advantage Heat Exchanger - "500 Temptender Hot Oil System"
354 Bottle Takeaway - Bottle Takeaway Conveyor
355 Baker Blow Mold Machine - Baker B-75 Blow Mold Machine - 4 heaad
356 Bottle Takeaway - Bottle Takeaway Conveyor
357 Bottle Trimmer - Automated Bottle Trimmer
358 Bekum Blow Molding Machine - Bekum 201 Blow Molding Machine
359 Blow Mold Machine - Wheel Style NRM Pacemaker III Blow Molding Machine
360 Parison Programmer - Hunkar 311 Series 2, Parison Programmer with Manual
361 Parison Programmer - Hunkar 311 Series 2, Parison Programmer with Manual
362 Parison Programmer - MOOG Model: 307-4-3 Parison Programmer with Manual
363 PLC - Allen Bradley PanelView 550 PLC
364 Conveyor - 16'9"x14" +/- Conveyor
365 Conveyor - 13'6"x12" +/- Conveyor
366 Conveyor - 5'x12" +/- Conveyor
367 Conveyor - 9'x12" +/- Conveyor
368 Blower - Dayton Blower with Dayton Motor
369 Recirculating Tank - Water Recirculating Tank with Two Pumps
370 Air Compressor - Ingersoll-Rand SSR EP 60 Air Compressor - Unknown Condition
371 Air Compressor - Ingersoll-Rand SSR EP75, 75 HP Air Compressor
372 Chiller - 15 Ton +/- Chiller with Manual - Unknown Condition
373 Carrier Chiller - 45 Ton Carrier Chiller, Model: 30RAP 0456FA00100
374 Clark C18C Forklift - 2016 C18C Forklift - Showing 624 Hours, Hours Subject to Change as Machine is Still in Use - Includes Documentation and Manuals
375 Nissan Optimum 30 forklift - Nissan Optimum 30 Forklift - Showing 11,117 Hours, Hours Subject to Change as Machine is Still in Use - Includes Documentation and Manual
KENNEDY'S AUCTION SERVICE
160 West Court Avenue, Selmer, TN 38375
More More Information Call Tim Mast - 731-610-5436
TN Firm #4834
Thank you for using EstateSales.NET. You're the best!